Product image
Product image

Bar Tile 3”x12” Glazed Ceramic Wall Tile - Lisbon

Color : Lisbon
Bar Tile 3”x12” Glazed Ceramic Wall Tile Oslo
Bar Tile 3”x12” Glazed Ceramic Wall Tile Havre
Bar Tile 3”x12” Glazed Ceramic Wall Tile Glasgow
Bar Tile 3”x12” Glazed Ceramic Wall Tile Nuuk
Bar Tile 3”x12” Glazed Ceramic Wall Tile Lisbon
Stockometer
Good Stock
Current Stock
205 Box
Enter Square Feet
10% Overage
Quantity (Box)
Ask a question

Products to Complete Your Project

TK100 Wedge Leveling System
TK100 Wedge (100 pieces)
TK100 Wedge Leveling System
TK1000 Wedge (1000 pieces)
TK100 Wedge Leveling System
TK250 Wedge (250 pieces)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 3/64” (1 mm)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 1/16” (1.5 mm)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 3/32” (2 mm)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 1/8” (3 mm)
Picture of TT500 Spacer Clips (500 pieces)
TT500 Spacer Clips (500 pieces) - 1/16” (1.5 mm)
Picture of TT500 Spacer Clips (500 pieces)
TT500 Spacer Clips (500 pieces) - 1/8” (3 mm)
Screw Caps
SW100 Screw Caps (100 pieces)
Screw Caps
SW250 Screw Caps (250 pieces)
Screw Clips
SC250 Screw Clips 1/16” (250 pieces)
Screw Clips
SC500 Screw Clips (500 pieces) - 1/16”
Screw Clips
SC500 Screw Clips (500 pieces) - 1/8”

Artesano draws inspiration from artisanal craftsmanship, offering an extensive selection of neutral hues that effortlessly infuse a sense of opulence into any setting. Perfect for enhancing the ambiance of any room, Artesano exudes a timeless elegance wherever it graces.

SPECIFICATIONS
SKUBATICERTIL164341
Size3”x12”
Thickness1/4”
ShapeRectangle
ColorRed, Pink
FinishGlazed
Sold ByBox
Items in Box50
Coverage Square Feet
Weight2.18 lbs/Square Foot

Ceramic Tile Installation Tips

Ceramic tile is a popular and affordable material that can be used in a variety of settings. However, it is important to follow the proper installation tips to ensure a successful project.

Ceramic Tile Installation

Installation Steps:

  1. Preparation:
    • Clean the Surface: Ensure the surface is clean, level, and dry. Remove any dirt, dust, or old adhesive.
    • Level the Surface: Use a leveling compound to fix any uneven areas. This is crucial for a flat and even tile installation.

  2. Planning the Layout:
    • Find the Center Point: Measure the area to find its center and start laying tiles from there to ensure a balanced look.
    • Dry Fit Tiles: Lay out the tiles without adhesive to see how they fit and make any necessary adjustments.

  3. Cutting the Tiles:
    • Tools: Use a tile cutter or wet saw for clean cuts.
    • Measure and Mark: Measure where the tile needs to be cut, mark it with a pencil, and cut slowly to avoid chipping.

  4. Applying Adhesive:
    • Adhesive Choice: Use a thin-set mortar suitable for ceramic tiles.
    • Spread the Adhesive: Using a notched trowel, spread the adhesive on a small section of the floor. Hold the trowel at a 45-degree angle to create ridges.
    • Back Buttering: Apply a thin layer of adhesive on the back of each tile for better adhesion.

  5. Laying the Tiles:
    • Set the Tiles: Press the tiles firmly into the adhesive, giving them a slight twist to ensure good contact.
    • Use Spacers: Place spacers between the tiles to maintain even grout lines.
    • Check for Level: Use a spirit level to ensure tiles are even. Tap down any high spots and add adhesive under low spots.

  6. Grouting:
    • Mix the Grout: Prepare the grout according to the manufacturer's instructions.
    • Apply the Grout: Spread the grout over the tiles using a rubber float. Hold the float at a 45-degree angle and work diagonally across the tiles to fill the joints.
    • Clean Excess Grout: Wipe away excess grout with a damp sponge. Rinse the sponge frequently to avoid smearing grout over the tiles.
    • Polish the Tiles: Once the grout has set, buff the tiles with a clean cloth to remove any haze.

  7. Sealing the Grout:
    • Apply Grout Sealer: Once the grout has fully cured (usually 24-72 hours), apply a grout sealer to protect against stains and moisture.

  8. Final Cleanup:
    • Final Wipe Down: After sealing, wipe down the entire surface with a damp cloth to remove any remaining dust or adhesive.

Additional Tips:


  • Always read the manufacturer's instructions carefully before installing any type of tile.
  • If you are not sure how to install tile, it is always best to hire a professional.
  • Be sure to wear the proper safety equipment when installing tile.

Related Products

Atlas 12”x24” Ceramic Wall Tile BlancoAtlas 12”x24” Ceramic Wall Tile Blanco viewAtlas 12”x24” Ceramic Wall Tile AloeAtlas 12”x24” Ceramic Wall Tile Aloe view
Amazon Black Slate Wall and Floor TileAmazon Black Slate Wall and Floor Tile 12”x24”Amazon Black Slate Wall and Floor Tile 24”x24”Amazon Black Slate Wall and Floor Tile 16”x16”Amazon Black Slate Wall and Floor Tile 12”x24”Amazon Black Slate Wall and Floor Tile 12”x12”