Wind Mill Grey Marble - Polished Floor and Wall Mosaic

Installing natural stone tiles involves a few extra considerations due to their unique characteristics and natural variations. Here’s a detailed guide for you:

Installation Steps:

1. Preparation:
   • Clean the Surface: Lay out the tiles to determine the best fit and to mix tiles from different boxes for a more natural look.
   • Tile Variation: Be aware of color and pattern variations, which are common in natural stone.


2. Planning the Layout:
   • Dry Layout: Measure the area to find its center and start laying tiles from there. This helps in achieving a balanced look.
   • Dry Fit Tiles: Arrange tiles in your desired pattern, ensuring that the end tiles are not too small. Adjust as necessary to maintain a visually appealing layout.


3. Cutting the Tiles:
   • Wet Saw: Use a wet saw with a diamond blade for clean cuts. Natural stone can be harder to cut and may chip more easily.
   • Safety Gear: Wear safety glasses and a mask to protect from dust and debris.


4. Applying Adhesive:
   • Mortar Choice: Use a thin-set mortar specifically designed for natural stone.
   • Back Buttering: Apply a layer of mortar on the back of the tiles to ensure full contact and prevent air pockets.


5. Laying the Tiles:
   • Set the Tiles: Place the tiles firmly into the mortar. Natural stone tiles can be thicker and heavier, requiring more pressure.
   • Leveling: Use tile leveling spacers to ensure the tiles stay level with each other.
   • Alignment: Check frequently to ensure tiles are properly aligned, as natural stone tiles can have slight size variations.


6. Grouting:
   • Choose the Right Grout: Use a non-sanded grout for natural stone, especially for narrow grout lines.
   • Seal Before Grouting: Some natural stones can absorb grout. Apply a stone sealer to prevent staining.
   • Grouting Process: Spread the grout with a rubber float, filling the joints completely.
   • Cleaning: Wipe excess grout with a damp sponge. Be careful not to remove grout from the joints.


7. Sealing The Tiles:
   • Sealer Type: Apply a penetrating sealer specifically designed for natural stone to protect against stains and moisture.
   • Application: Follow the manufacturer’s instructions for application and reapplication, as natural stone may require multiple coats.


8. Final Cleanup:
   • Remove Haze: Once the grout and sealer are dry, clean the tiles with a stone-safe cleaner to remove any haze or residue.
   • Polish: Buff the tiles with a clean, dry cloth to enhance their natural beauty.

Additional Tips:

• Always read the manufacturer's instructions carefully before installing any type of tile.
• If you are not sure how to install tile, it is always best to hire a professional.
• Be sure to wear the proper safety equipment when installing tile.