Statuario Polished Wall and Floor Tile
Statuario Polished Wall and Floor Tile

Statuario Polished Wall and Floor Tile - 12"x24" 

Stockometer
Good Stock
Enter Square Feet
10% Overage
Quantity (Box)
Ask a question

Products to Complete Your Project

TK100 Wedge Leveling System
TK100 Wedge (100 pieces)
TK100 Wedge Leveling System
TK1000 Wedge (1000 pieces)
TK100 Wedge Leveling System
TK250 Wedge (250 pieces)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 3/64” (1 mm)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 1/16” (1.5 mm)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 3/32” (2 mm)
Picture of TT250 Spacer Clips (250 pieces)
TT250 Spacer Clips (250 pieces) - 1/8” (3 mm)
Picture of TT500 Spacer Clips (500 pieces)
TT500 Spacer Clips (500 pieces) - 1/16” (1.5 mm)
Picture of TT500 Spacer Clips (500 pieces)
TT500 Spacer Clips (500 pieces) - 1/8” (3 mm)
Screw Caps
SW100 Screw Caps (100 pieces)
Screw Caps
SW250 Screw Caps (250 pieces)
Screw Clips
SC250 Screw Clips 1/16” (250 pieces)
Screw Clips
SC500 Screw Clips (500 pieces) - 1/16”
Screw Clips
SC500 Screw Clips (500 pieces) - 1/8”

Transform your space with our Statuario Polished Wall and Floor Tile. Made with high-quality porcelain, this tile's smooth and shiny finish will add a touch of elegance to your walls and floors. Elevate your home with this versatile and durable tile.

SPECIFICATIONS
SKUSTPOPORTIL875189
Size12”x24”
Thickness3/8”
ShapeRectangle
ColorWhite, Grey
FinishPolished
Sold ByBox
Items in Box6
Coverage Square Feet
Usage AreaFloor, Wall, Backsplash, Accent
RoomKitchen, Bathroom, Entryway, Laundry Room, Shower, Fireplace, Bar
Weight4.50 lbs/Square Foot

Porcelain Tile Installation Tips

Porcelain tile is a durable and versatile material that can be used in a variety of settings. However, it is important to follow the proper installation tips to ensure a successful project.

Porcelain Tile Installation

Installation Steps:

  1. Preparation:
    • Clean the Surface: Ensure the surface is free of dirt, dust, and grease. A clean surface guarantees better adhesion.
    • Level the Surface: Use a leveling compound to fix any uneven areas.
    • Dry Run: Lay out the tiles without adhesive to see how they fit and make any necessary cuts.

  2. Planning the Layout:
    • Find the Center Point: Measure the area to find its center and start laying tiles from there. This helps in achieving a balanced look.
    • Dry Fit Tiles: Arrange tiles in your desired pattern, ensuring that the end tiles are not too small. Adjust as necessary to maintain a visually appealing layout.

  3. Cutting the Tiles:
    • Tools: Use a wet saw, tile cutter, or snap cutter for clean, precise cuts.
    • Measure and Mark: Measure where the tile needs to be cut, mark it with a pencil, and cut slowly to avoid chipping.

  4. Applying Adhesive:
    • Choose the Right Adhesive: Select an adhesive suitable for porcelain tiles.
    • Spread the Adhesive: Using a notched trowel, spread the adhesive on a small section of the floor. Hold the trowel at a 45-degree angle to create ridges.
    • Back Butter Tiles: Apply a thin layer of adhesive on the back of each tile for better adhesion.

  5. Laying the Tiles:
    • Set the Tiles: Press the tiles into the adhesive firmly, giving them a slight twist to ensure good contact.
    • Use Spacers: Place spacers between the tiles to maintain even grout lines.
    • Check for Level: Use a spirit level to ensure tiles are even. Tap down any high spots and add adhesive under low spots.

  6. Grouting:
    • Mix the Grout: Prepare the grout according to the manufacturer's instructions.
    • Apply the Grout: Spread the grout over the tiles using a rubber float. Hold the float at a 45-degree angle and work diagonally across the tiles to fill the joints.
    • Clean Excess Grout: Wipe away excess grout with a damp sponge. Rinse the sponge frequently to avoid smearing grout over the tiles.
    • Polish the Tiles: Once the grout has set, buff the tiles with a clean cloth to remove any haze.

  7. Sealing The Grout:
    • Apply Grout Sealer: Once the grout has fully cured (usually 24-72 hours), apply a grout sealer to protect against stains and moisture.

  8. Final Cleanup:
    • Final Wipe Down: After sealing, wipe down the entire surface with a damp cloth to remove any remaining dust or adhesive.

Additional Tips:


  • Always read the manufacturer's instructions carefully before installing any type of tile.
  • If you are not sure how to install tile, it is always best to hire a professional.
  • Be sure to wear the proper safety equipment when installing tile.

Related Products

Full White Polished Wall and Floor TileFull White Polished Wall and Floor Tile
Maset Satvario Polished 12X24 Wall And Floor Tile
Pietra Black Polished Wall and Floor TilePietra Black Polished Wall and Floor Tile
Amazon Black Slate Wall and Floor TileAmazon Black Slate Wall and Floor Tile 12”x24”Amazon Black Slate Wall and Floor Tile 24”x24”Amazon Black Slate Wall and Floor Tile 16”x16”Amazon Black Slate Wall and Floor Tile 12”x24”Amazon Black Slate Wall and Floor Tile 12”x12”