Extra Light Travertine 12”x24” Tumbled Pavers - 2”

Travertine is a natural limestone formed by mineral deposits from hot springs and groundwater. It has a warm, earthy palette — creams, beiges, golds, and rusty tones — with a distinctive pitted surface and natural veining that gives it a classic, timeless character.

The primary difference lies in the surface texture and maintenance requirements. Travertine naturally forms with organic voids and holes caused by escaping gases during geological creation. Filled travertine has these holes pre-filled with a color-matched cement epoxy at the factory for a smooth, easy-to-clean surface. Unfilled travertine leaves these natural cavities open, offering a highly textured, rustic look that is popular for outdoor spaces but requires more effort to keep clean indoors.

Yes, travertine is a porous natural stone that must be sealed to protect it from moisture, stains, and dirt buildup. We highly recommend applying a high-quality penetrating sealer immediately after installation and before grouting, followed by a final coat after the grout cures. For high-traffic residential or wet environments, resealing every 1 to 2 years will preserve the stone's integrity.

Yes, travertine is one of the premier choices for outdoor patios and pool decks. It is naturally heat-resistant, meaning it stays remarkably cool under bare feet even in direct summer sunlight. Furthermore, choosing a tumbled, unfilled, or natural cleft finish provides exceptional built-in slip resistance when wet, making it incredibly safe for pool surrounds.

To clean travertine, use only pH-neutral stone cleaners or warm water mixed with a few drops of mild dish soap. Never use acidic cleaners, vinegar, bleach, or abrasive scrubbing pads. Travertine is made of calcium carbonate, meaning any acidic substance will chemically react with the stone, creating dull, permanent chemical burns known as "etch marks."

Travertine naturally forms with small voids and pits caused by gas bubbles during its formation. Tiles come either filled (the holes are pre-filled with grout or resin for a smoother surface) or unfilled (the natural voids are left open for a more rustic look). Both are valid choices depending on the finish and setting you want.

Travertine is a natural stone, so shade, movement, and veining vary between tiles and batches. We recommend ordering all tiles for a project at once and dry-laying from several boxes to achieve a well-blended, natural look.

Yes, when properly sealed. A honed or brushed finish is generally preferred over polished in wet areas for better slip resistance and practicality.

Each pcs covers approximately 2.0 square feet. Measure the area you need to cover and add about 10% extra for cuts and waste.

Yes — for this product you can order a swatch sample before placing a full order.